*Guest blog by Keshav Dhandhania and Arash Delijani.*

In this article, I’ll talk about **Generative Adversarial Networks**, or GANs for short. GANs are one of the very few machine learning techniques which has given good performance for generative tasks, or more broadly unsupervised learning. In particular, they have given splendid performance for a variety of image generation related tasks. Yann LeCun, one of the forefathers of deep learning, has called them “the best idea in machine learning in the last 10 years”. Most importantly, the core conceptual ideas associated with a GAN are quite simple to understand (and in-fact, you should have a good idea about them by the time you finish reading this article).

In this article, we’ll explain GANs by applying them to the task of generating images. The following is the outline of this article

- A brief review of Deep Learning
- The image generation problem
- Key issue in generative tasks
- Generative Adversarial Networks
- Challenges
- Further reading
- Conclusion

**A brief review of Deep Learning**

*Sketch of a (feed-forward) neural network, with input layer in brown, hidden layers in yellow, and output layer in red.*

Let’s begin with a brief overview of deep learning. Above, we have a sketch of a *neural network*. The neural network is made of up *neurons*, which are connected to each other using *edges*. The neurons are organized into *layers* - we have the hidden layers in the middle, and the input and output layers on the left and right respectively. Each of the edges is *weighted*, and each neuron performs a weighted sum of values from neurons connected to it by incoming edges, and thereafter applies a nonlinear activation such as sigmoid or ReLU. For example, neurons in the first hidden layer, calculate a weighted sum of neurons in the input layer, and then apply the ReLU function. The activation function introduces a nonlinearity which allows the neural network to model complex phenomena (multiple linear layers would be equivalent to a single linear layer).

Given a particular input, we sequentially compute the values outputted by each of the neurons (also called the neurons’ *activity*). We compute the values layer by layer, going from left to right, using already computed values from the previous layers. This gives us the values for the output layer. Then we define a *cost*, based on the values in the output layer and the desired output (target value). For example, a possible cost function is the mean-squared error cost function.

where, *x* is the input, *h(x)* is the output and *y* is the target. The sum is over the various data points in our dataset.

At each step, our goal is to nudge each of the edge weights by the right amount so as to reduce the cost function as much as possible. We calculate a *gradient,* which tells us how much to nudge each weight. Once we compute the cost, we compute the gradients using the *backpropagation algorithm*. The main result of the backpropagation algorithm is that we can exploit the chain rule of differentiation to calculate the gradients of a layer given the gradients of the weights in layer above it. Hence, we calculate these gradients *backwards*, i.e. from the output layer to the input layer. Then, we update each of the weights by an amount proportional to the respective gradients (i.e. *gradient descent*).

If you would like to read about neural networks and the back-propagation algorithm in more detail, I recommend reading this article by Nikhil Buduma on Deep Learning in a Nutshell.

**The image generation problem**

In the image generation problem, we want the machine learning model to generate images. For training, we are given a dataset of images (say 1,000,000 images downloaded from the web). During testing, the model should generate images that look like they belong to the training dataset, but are not actually in the training dataset. That is, we want to generate *novel* images (in contrast to simply memorizing), but we still want it to capture patterns in the training dataset so that new images feel like they look similar to those in the training dataset.

*Image generation problem: There is no input, and the desired output is an image.*

One thing to note: there is no input in this problem during the testing or prediction phase. Everytime we ‘run the model’, we want it to generate (output) a new image. This can be achieved by saying that the input is going to be sampled randomly from a distribution that is easy to sample from (say the uniform distribution or Gaussian distribution).

**Key issue in generative tasks**

The crucial issue in a generative task is - what is a good cost function? Let’s say you have two images that are outputted by a machine learning model. How do we decide which one is better, and by how much?

The most common solution to this question in previous approaches has been, *distance between the output and its closest neighbor in the training dataset*, where the distance is calculated using some predefined distance metric. For example, in the language translation task, we usually have one source sentence, and a small set of (about 5) target sentences, i.e. translations provided by different human translators. When a model generates a translation, we compare the translation to each of the provided targets, and assign it the score based on the target it is closest to (in particular, we use the BLEU score, which is a distance metric based on how many n-grams match between the two sentences). That kind of works for single sentence translations, but the same approach leads to a significant deterioration in the quality of the cost function when the target is a larger piece of text. For example, our task could be to generate a paragraph length summary of a given article. This deterioration stems from the inability of the small number of samples to represent the wide range of variation observed in *all possible correct answers*.

**Generative Adversarial Networks**

GANs answer to the above question is, ** use another neural network**! This scorer neural network (called the discriminator) will score how realistic the image outputted by the generator neural network is. These two neural networks have opposing objectives (hence, the word

This puts generative tasks in a setting similar to the 2-player games in reinforcement learning (such as those of chess, Atari games or Go) where we have a machine learning model improving continuously by playing against itself, starting from scratch. The difference here is that often in games like chess or Go, the roles of the two players are symmetric (although not always). For GAN setting, the objectives and roles of the two networks are different, one generates fake samples, the other distinguishes real ones from fake ones.

*Sketch of Generative Adversarial Network, with the generator network labelled as G and the discriminator network labelled as D*

Above, we have a diagram of a Generative Adversarial Network. The generator network G and discriminator network D are playing a 2-player minimax game. First, to better understand the setup, notice that D’s inputs can be sampled from the training data or the output generated by G: Half the time from one and half the time from the other. To generate samples from G, we sample the latent vector from the Gaussian distribution and then pass it through G. If we are generating a 200 x 200 grayscale image, then G’s output is a 200 x 200 matrix. The objective function is given by the following function, which is essentially the standard log-likelihood for the predictions made by D:

The generator network G is minimizing the objective, i.e. reducing the log-likelihood, or trying to confuse D. It wants D to identify the the inputs it receives from G as correct whenever samples are drawn from its output. The discriminator network D is maximizing the objective, i.e. increasing the log-likelihood, or trying to distinguish generated samples from real samples. In other words, if G does a good job of confusing D, then it will minimize the objective by increasing *D*(*G*(*x*)) in the second term. If D does its job well, then in cases when samples are chosen from the training data, they add to the objective function via the first term (because *D*(*x*) would be larger) and decrease it via the second term (because *D*(*x*) would be small)

Training proceeds as usual, using random initialization and backpropagation, with the addition that we alternately update the discriminator and the generator and keep the other one fixed. The following is a description of the end-to-end workflow for applying GANs to a particular problem

- Decide on the GAN architecture: What is architecture of G? What is the architecture of D?
- Train: Alternately update D and G for a fixed number of updates
- Update D (freeze G): Half the samples are real, and half are fake.
- Update G (freeze D): All samples are generated (note that even though D is frozen, the gradients
*flow through D*)

- Manually inspect some fake samples. If quality is high enough (or if quality is not improving), then stop. Else repeat step 2.

When both G and D are feed-forward neural networks, the results we get are as follows (trained on MNIST dataset).

*Results from* *Goodfellow et. al**. Rightmost column (in yellow boxes) are the closest images from the training dataset to the image on its direct left. All other images are generated samples.*

Using a more sophisticated architecture for G and D with strided convolutional, adam optimizer instead of stochastic gradient descent, and a number of other improvements in architecture, hyperparameters and optimizers (see paper for details), we get the following results

*Results from* *Alec Radford et. al**. Images are of ‘bedrooms’.*

**Challenges**

The most critical challenge in training GANs is related to the possibility of non-convergence. Sometimes this problem is also called *mode collapse*. To explain this problem simply, lets consider an example. Suppose the task is to generate images of digits such as those in the MNIST dataset. One possible issue that can arise (and does arise in practice) is that G might start producing images of the digit 6 and no other digit. Once D adapts to G’s current behavior, in-order to maximize classification accuracy, it will start classifying all digit 6’s as fake, and all other digits as real (assuming it can’t tell apart fake 6’s from real 6’s). Then, G adapts to D’s current behavior and starts generating only digit 8 and no other digit. Then D adapts, and starts classifying all 8’s as fake and everything else as real. Then G moves onto 3’s, and so on. Basically, G only produces images that are similar to a (very) small subset of the training data and once D starts discriminating that subset from the rest, G switches to some other subset. They are simply oscillating. Although this problem is not completely resolved, there are some solutions to it. We won’t discuss them in detail here, but one of them involves *minibatch features* and / or backpropagating through many updates of D. To learn more about this, check out the suggested readings in the next section.

**Further reading**

If you would like to learn about GANs in much more depth, I suggest checking out the ICCV 2017 tutorials on GANs. There are multiple tutorials, each focusing on different aspect of GANs, and they are quite recent.

I’d also like to mention the concept of Conditional GANs. Conditional GANs are GANs where the output is conditioned on the input. For example, the task might be to output an image matching the input description. So if the input is “dog”, then the output should be an image of a dog.

Below are results from some recent research (along with links to those papers).

*Results for ‘Text to Image synthesis’ by* *Reed et. al*

*Results for Image Super-resolution by* *Ledig et. al*

* **Results for Image to Image translation by* *Isola et. al*

*Generating high resolution ‘celebrity like’ images by* *Karras et. al*

Last but not the least, if you would like to do a lot more reading on GANs, check out this list of GAN papers categorized by application and this list of 100+ different GAN variations.

**Conclusion**

I hope that in this article, you have understood a new technique in deep learning called Generative Adversarial Networks. They are one of the few successful techniques in unsupervised machine learning, and are quickly revolutionizing our ability to perform generative tasks. Over the last few years, we’ve come across some very impressive results. There is a lot of active research in the field to apply GANs for language tasks, to improve their stability and ease of training, and so on. They are already being applied in industry for a variety of applications ranging from interactive image editing, 3D shape estimation, drug discovery, semi-supervised learning to robotics. I hope this is just the beginning of your journey into adversarial machine learning.

**About the Authors**

Keshav Dhandhania: is a cofounder of Compose Labs (commonlounge.com) and has spoken on GANs at international conferences including DataSciCon.Tech, Atlanta and DataHack Summit, Bangaluru, India. He did his masters in Artificial Intelligence from MIT, and his research focused on natural language processing, and before that, computer vision and recommendation systems.

© 2020 Data Science Central ® Powered by

Badges | Report an Issue | Privacy Policy | Terms of Service

**Upcoming DSC Webinar**

- Optimization and The NFL’s Toughest Scheduling Problem - June 23

At first glance, the NFL’s scheduling problem seems simple: 5 people have 12 weeks to schedule 256 games over the course of a 17-week season. The scenarios are potentially well into the quadrillions. In this latest Data Science Central webinar, you will learn how the NFL began using Gurobi’s mathematical optimization solver to tackle this complex scheduling problem. Register today.

**Most Popular Content on DSC**

To not miss this type of content in the future, subscribe to our newsletter.

- Book: Statistics -- New Foundations, Toolbox, and Machine Learning Recipes
- Book: Classification and Regression In a Weekend - With Python
- Book: Applied Stochastic Processes
- Long-range Correlations in Time Series: Modeling, Testing, Case Study
- How to Automatically Determine the Number of Clusters in your Data
- New Machine Learning Cheat Sheet | Old one
- Confidence Intervals Without Pain - With Resampling
- Advanced Machine Learning with Basic Excel
- New Perspectives on Statistical Distributions and Deep Learning
- Fascinating New Results in the Theory of Randomness
- Fast Combinatorial Feature Selection

**Other popular resources**

- Comprehensive Repository of Data Science and ML Resources
- Statistical Concepts Explained in Simple English
- Machine Learning Concepts Explained in One Picture
- 100 Data Science Interview Questions and Answers
- Cheat Sheets | Curated Articles | Search | Jobs | Courses
- Post a Blog | Forum Questions | Books | Salaries | News

**Archives:** 2008-2014 |
2015-2016 |
2017-2019 |
Book 1 |
Book 2 |
More

**Upcoming DSC Webinar**

- Optimization and The NFL’s Toughest Scheduling Problem - June 23

At first glance, the NFL’s scheduling problem seems simple: 5 people have 12 weeks to schedule 256 games over the course of a 17-week season. The scenarios are potentially well into the quadrillions. In this latest Data Science Central webinar, you will learn how the NFL began using Gurobi’s mathematical optimization solver to tackle this complex scheduling problem. Register today.

**Most popular articles**

- Free Book and Resources for DSC Members
- New Perspectives on Statistical Distributions and Deep Learning
- Time series, Growth Modeling and Data Science Wizardy
- Statistical Concepts Explained in Simple English
- Machine Learning Concepts Explained in One Picture
- Comprehensive Repository of Data Science and ML Resources
- Advanced Machine Learning with Basic Excel
- Difference between ML, Data Science, AI, Deep Learning, and Statistics
- Selected Business Analytics, Data Science and ML articles
- How to Automatically Determine the Number of Clusters in your Data
- Fascinating New Results in the Theory of Randomness
- Hire a Data Scientist | Search DSC | Find a Job
- Post a Blog | Forum Questions

## You need to be a member of Data Science Central to add comments!

Join Data Science Central